Home › Vehicle Exterior › WIPER / WASHER › WIPER ECU › 2020.03–2020.07
RM36W0E _59 Vehicle Exterior _088063 WIPER / WASHER _0424534 WIPER ECU A

WIPER / WASHER  WIPER ECU  INSTALLATION  


PROCEDURE

Hide 85940 1.INSTALL WINDSHIELD WIPER RELAY ASSEMBLY

a.
E427675

Engage the guides to install the windshield wiper relay assembly with the bolt.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


b.

Connect the 2 connectors.


Hide 2.INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY RH

a.

Engage the clamps.

E433348


b.

Connect the each connector.


c.

Install the instrument panel junction block assembly RH with the 2 nuts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 4.CONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

Hide 5. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART