After replacing the hybrid vehicle control ECU, make sure to perform ECU configuration.
After performing the ECU configuration procedure and update ECU security key procedure, make sure to perform the initialization procedure for when the cable has been disconnected and reconnected to the negative (-) auxiliary battery terminal.
89981
1.INSTALL HYBRID VEHICLE CONTROL ECU
Engage the 2 claws to install the hybrid vehicle control ECU as shown in the illustration.
Make sure that the hybrid vehicle control ECU is securely installed.
2.INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY WITH MULTIPLEX NETWORK BODY ECU
3.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
4. UPDATE ECU SECURITY KEY
5. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the battery, there is an automatic learning function thatcompletes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART