Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › BATTERY PLUG
RM36W0E _51 Engine / Hybrid System _087936 HYBRID / BATTERY CONTROL _0424598 BATTERY PLUG A

HYBRID / BATTERY CONTROL  BATTERY PLUG  INSTALLATION  


PROCEDURE

Hide G3830A 1.INSTALL ELECTRIC VEHICLE BATTERY PLUG ASSEMBLY

CAUTION:

Be sure to wear insulated gloves and protective goggles.


a.

Install the electric vehicle battery plug assembly to the HV battery with the bolt.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


b.

Connect the hybrid battery terminal block connector.

NOTICE:

Make sure that the connector is connected securely.



c.

Connect the HV battery junction block assembly connector.

NOTICE:

Make sure that the connector is connected securely.



d.

Engage the claw to close the wiring harness protector.


e.

Connect the electric vehicle battery plug assembly connector.


Hide G92N1 2.INSTALL HV BATTERY UPPER COVER PANEL

Hide 71033 3.INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY

Hide 72693 5.INSTALL REAR SEAT CUSHION LOCK HOOK

Hide 6.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

Hide 73350C 7.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY