Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › BATTERY BLOWER
RM36W0E _51 Engine / Hybrid System _087936 HYBRID / BATTERY CONTROL _0424599 BATTERY BLOWER A

HYBRID / BATTERY CONTROL  BATTERY BLOWER  INSTALLATION  


PROCEDURE

Hide G9230 1.INSTALL BATTERY COOLING BLOWER ASSEMBLY

a.

Install the battery cooling blower assembly with the 3 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)

NOTICE:
·

Be sure not to touch the fan part of the battery cooling blower assembly.

·

Do not lift the battery cooling blower assembly using the wire harness.




b.

Engage the 2 clamps.


c.

Connect the battery cooling blower assembly connector.


Hide 71033 2.INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY

Hide 76974F 4.INSTALL REAR UNDER SIDE COVER LH

Hide 76973F 5.INSTALL REAR UNDER SIDE COVER RH

Hide 72693 6.INSTALL REAR SEAT CUSHION LOCK HOOK

Hide 7.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

Hide 73350C 8.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY