Home › Brake › PARKING BRAKE › PARKING BRAKE LEVER › 2020.03–2020.07
RM36W0E _54 Brake _089430 PARKING BRAKE _0424719 PARKING BRAKE LEVER A

PARKING BRAKE  PARKING BRAKE LEVER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL PARKING BRAKE SWITCH ASSEMBLY

a.

Install the parking brake switch assembly with the screw.

Torque:
0.88 N*m (9 kgf*cm, 8 in.*lbf)


Hide 46201E 2.INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY

a.
C435195

Pass the No. 1 parking brake cable assembly through the parking brake lever sub-assembly.


b.

Bend down the parking brake lever sub-assembly claw.

NOTICE:

Do not damage the No. 1 parking brake cable assembly.



c.

Install the parking brake equalizer with a new No. 1 wire adjusting nut.


d.

Install the parking brake lever sub-assembly with the 2 bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


e.

Connect the parking brake switch connector.


Hide 3.CONNECT PARKING BRAKE CABLE ASSEMBLY

C435196

a.

Connect the No. 3 parking brake cable assembly to the parking brake equalizer as shown in the illustration.


Hide 58996A 4.INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET

a.

Install the No. 2 console box mounting bracket with the 4 bols.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)


Hide 5.ADJUST PARKING BRAKE LEVER TRAVEL

Hide 6.INSPECT BRAKE WARNING LIGHT

Hide 58910C 7.INSTALL REAR CONSOLE BOX ASSEMBLY