Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SYSTEM
RM36W0E _56 Audio / Visual / Telematics _088657 PARK ASSIST / MONITORING _0425251 BLIND SPOT MONITOR SYSTEM C

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SYSTEM  C1AB604  Rear Side Radar Sensor (Module "B") System Internal Failure  


DESCRIPTION

This DTC is stored when the blind spot monitor sensor LH (B) detects an internal malfunction.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1AB604 Rear Side Radar Sensor (Module "B") System Internal Failure The blind spot monitor sensor LH (B) detects an internal malfunction Blind spot monitor sensor LH (B)

CAUTION / NOTICE / HINT

NOTICE:

When checking for DTCs, make sure that the blind spot monitor system is turned on.


PROCEDURE

1.CHECK DTC
a.

Turn the ignition switch off.


b.

Turn the ignition switch to ON.


c.

Recheck for DTCs and check if the same DTC is output again.

Body Electrical > Blind Spot Monitor "B" > Trouble Codes
50001 460
OK:

No DTCs are output.



Result:
Proceed to
OK
NG



OK

NG