Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM WARNING SWITCH › 2020.03–2020.07
RM36W0E _54 Brake _088656 BRAKE SYSTEM (OTHER) _0426825 VACUUM WARNING SWITCH A

BRAKE SYSTEM (OTHER)  VACUUM WARNING SWITCH  INSTALLATION  


PROCEDURE

Hide 83390H 1.INSTALL VACUUM WARNING SWITCH ASSEMBLY

a.

Install a new vacuum warning switch grommet to the brake booster assembly.


b.
C435060C01
1.104,0.042 1.323,0.271 0.219,0.229 10 true *a 1.833,0.063 2.063,0.271 0.229,0.208 10 true *b
*a 45° +/- 20°
*b Up


Install the vacuum warning switch assembly to the brake booster assembly as shown in the illustration.


c.

Connect the connector to the vacuum warning switch assembly.


Hide 2.INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY