Home › Engine / Hybrid System › 1KR-FE (EMISSION CONTROL) › EGR COOLER › from 2020.07
RM36W0E _51 Engine / Hybrid System _090964 1KR-FE EMISSION CONTROL _0431150 EGR COOLER A

1KR-FE EMISSION CONTROL  EGR COOLER  INSTALLATION  


PROCEDURE

Hide 25680 1.INSTALL EGR COOLER ASSEMBLY

a.

Install a new No. 1 EGR cooler gasket to the EGR valve assembly.


b.
A423435

Install the EGR cooler assembly to the EGR valve assembly with the 2 nuts.

Torque:
32 N*m (326 kgf*cm, 24 ft.*lbf)


c.

Connect the No. 3 water by-pass hose to the EGR cooler assembly and slide the clip to secure it.


Hide 2.INSTALL EGR VALVE WITH COOLER ASSEMBLY