After performing the update ECU security key procedure, make sure to perform the initialization procedure for when the cable has been disconnected and reconnected to the negative (-) auxiliary battery terminal.
89261A
1.INSTALL ENGINE STOP AND START ECU (for LHD)
Engage the 2 claws and install the engine stop and start ECU to the ECU integration box RH.
Make sure that the engine stop and start ECU is securely installed.
89261A
2.INSTALL ENGINE STOP AND START ECU (for RHD)
Engage the 2 claws and install the engine stop and start ECU to the ECU integration box LH.
Make sure that the engine stop and start ECU is securely installed.
82878
3.INSTALL ECU INTEGRATION BOX RH (for LHD)
82878
4.INSTALL ECU INTEGRATION BOX LH (for RHD)
5.PERFORM REGISTRATION