F1334
1.INSTALL NO. 1 CONVERTER CONTROL BRACKET
Install the No. 1 converter control bracket to the eco run vehicle converter assembly with the 2 bolts.
G92C0A
2.INSTALL ECO RUN VEHICLE CONVERTER ASSEMBLY
Install the eco run vehicle converter assembly with the bolt and nut.
| *a | Lock Lever |
Connect the eco run vehicle converter assembly connector and move the lock lever as shown in the illustration to lock the connector.
3.INSTALL FRONT BUMPER ASSEMBLY
4.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
5. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART