88211B
1.INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY
If the millimeter wave radar sensor assembly has been struck or dropped, replace the millimeter wave radar sensor assembly with a new one.
Engage the 2 guides.
|
Bolt |
|
Screw |
Install the millimeter wave radar sensor assembly with the 2 bolts and screw.
Tighten the bolts and screw in the order shown in the illustration.
Connect the connector.
2.INSTALL FRONT BUMPER ASSEMBLY
3. UPDATE ECU SECURITY KEY
4.ADJUST MILLIMETER WAVE RADAR SENSOR
When the millimeter wave radar sensor assembly is replaced with a new one, adjustment of the radar sensor beam axis must be performed.
Millimeter wave radar sensor assembly Learning can be performed by using either Triangle Target or Flat Surface Target.
Triangle Target:
Flat Surface Target: