Home › Engine / Hybrid System › 1KR-FE (ENGINE MECHANICAL) › FRONT CRANKSHAFT OIL SEAL › from 2020.07
RM36W0E _51 Engine / Hybrid System _091035 1KR-FE ENGINE MECHANICAL _0431328 FRONT CRANKSHAFT OIL SEAL A

1KR-FE ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  REMOVAL  


PROCEDURE

Hide 16361A 1.REMOVE FAN AND GENERATOR V BELT

Hide 13471 3.REMOVE CRANKSHAFT PULLEY

a.
A322560C01
2.719,1.531 2.969,1.24 true 2.49,1.802 2.698,1.958 0.208,0.156 10 true *a 1.302,1.906 1.49,2.083 0.188,0.177 10 true *b 2.99,1.156 3.271,1.323 0.281,0.167 10 true SST
*a Hold
*b Turn


Using SST, hold the crankshaft pulley in place and loosen the crankshaft pulley set bolt.

SST
09960-10010  (09962-01000, 09963-01000)


b.
A324944C01
1.625,1.563 1.208,0.677 false 2.208,0.365 2.146,0.219 false 0.073,1.438 0.281,1.604 0.208,0.167 10 true *a 0.302,2.927 0.5,3.094 0.198,0.167 10 true *b 0.906,0.594 1.219,0.76 0.313,0.167 10 false SST 1.865,0.135 2.177,0.302 0.313,0.167 10 false SST
*a Hold
*b Turn


Tighten the crankshaft pulley set bolt until 2 or 3 threads are screwed into the crankshaft.


c.

Using SST, remove the crankshaft pulley and crankshaft pulley set bolt.

SST
09950-40011  (09951-04010, 09953-04030, 09958-04011, 09955-04011, 09952-04010, 09954-04020, 09957-04010)
09950-60011  (09952-06010, 09951-00420, 09951-00430)


Hide 11302A 4.REMOVE TIMING CHAIN COVER OIL SEAL

a.
A322223C01
1.385,0.823 1.802,0.406 false 1.844,0.281 2.052,0.479 0.208,0.198 10 true *a
*a Protective Tape


Using a screwdriver, pry out the timing chain cover oil seal.

NOTICE:

After removal, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.


HINT:

Tape the screwdriver tip before use.