Home › Engine / Hybrid System › 1KR-FE (COOLING) › COOLING FAN MOTOR › from 2020.07
RM36W0E _51 Engine / Hybrid System _091037 1KR-FE COOLING _0431359 COOLING FAN MOTOR A

1KR-FE COOLING  COOLING FAN MOTOR  REMOVAL  


PROCEDURE

Hide 1.DRAIN ENGINE COOLANT

Hide 2.REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

Hide 17751 3.REMOVE NO. 1 AIR CLEANER INLET

a.
A468535

Disengage the 2 claws and remove the No. 1 air cleaner inlet.


Hide 16261G 4.DISCONNECT NO. 1 WATER BY-PASS HOSE

a.
A470521

Disengage the clamp to disconnect the No. 1 water by-pass hose from the fan shroud assembly.


b.

Slide the clip and disconnect the No. 1 water by-pass hose.


Hide 16571C 5.DISCONNECT NO. 1 RADIATOR HOSE

a.
A470522

Slide the clip and disconnect the No. 1 radiator hose.


Hide 16573B 6.DISCONNECT NO. 3 RADIATOR HOSE

a.
A470523

Disengage the clamp to disconnect the No. 3 radiator hose from the fan shroud assembly.


b.

Slide the clip and disconnect the No. 3 radiator hose.


Hide 16572D 7.DISCONNECT NO. 2 RADIATOR HOSE

a.
A470524

Disconnect the No. 2 radiator hose.


Hide 16711 8.REMOVE FAN SHROUD

a.
A468536

Engage the 2 wire harness clamps and disconnect the cooling fan motor connector.


b.
A468537

Disengage the 2 claws and 2 guides to remove the fan shroud.


Hide 16361 9.REMOVE FAN

a.
A470525

Remove the nut and fan.


Hide 16363 10.REMOVE COOLING FAN MOTOR

a.
A470526

Remove the 3 screws and cooling fan motor.