1.DRAIN ENGINE COOLANT
2.REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE
| *a | Guide |
| *b | Clamp |
Disengage the 2 clamps and 2 guides.
Remove the 2 bolts.
Slide the hose clip to disconnect the No. 2 ventilation hose.
Loosen the hose clamp to remove the air cleaner cap with air cleaner hose from the throttle body with motor assembly.
22030
3.REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY
Disconnect the throttle body with motor assembly connector.
Slide the clip and disconnect the No. 2 water by-pass hose from the throttle body with motor assembly.
Slide the clip and disconnect the No. 1 water by-pass hose from the throttle body with motor assembly.
Using an 8 mm socket wrench, remove the 3 bolts and throttle body with motor assembly from the intake manifold.
If the throttle body with motor assembly has been struck or dropped, replace it.
22271A
4.REMOVE THROTTLE BODY GASKET
Remove the throttle body gasket from the intake manifold.