Home › Engine / Hybrid System › 1KR-FE (COOLING) › COOLING FAN MOTOR › from 2020.07
RM36W0E _51 Engine / Hybrid System _091037 1KR-FE COOLING _0431359 COOLING FAN MOTOR A

1KR-FE COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 16363 1.INSTALL COOLING FAN MOTOR

a.

Install the cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16361 2.INSTALL FAN

a.

Install the fan with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 16711 3.INSTALL FAN SHROUD

a.

Engage the 2 claws and 2 guides to install the fan shroud.


b.

Connect the cooling fan motor connector and engage the 2 wire harness clamps.


Hide 16572D 4.CONNECT NO. 2 RADIATOR HOSE

a.

Connect the No. 2 radiator hose.


Hide 16573B 5.CONNECT NO. 3 RADIATOR HOSE

a.

Connect the No. 3 radiator hose to the radiator assembly and slide the clip to secure it.


b.

Engage the clamp.


Hide 16571C 6.CONNECT NO. 1 RADIATOR HOSE

a.

Connect the No. 1 radiator hose to the radiator assembly and slide the clip to secure it.


Hide 16261G 7.CONNECT NO. 1 WATER BY-PASS HOSE

a.

Connect the No. 1 water by-pass hose to the radiator assembly and slide the clip to secure it.


b.

Engage the clamp.


Hide 17751 8.INSTALL NO. 1 AIR CLEANER INLET

a.

Connect the 2 claws and install the No. 1 air cleaner inlet.


Hide 9.INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

Hide 10.ADD ENGINE COOLANT

Hide 11.INSPECT FOR COOLANT LEAK