Home › Engine / Hybrid System › 1KR-FE (LUBRICATION) › OIL PRESSURE SWITCH › from 2020.07
RM36W0E _51 Engine / Hybrid System _091047 1KR-FE LUBRICATION _0431395 OIL PRESSURE SWITCH A

1KR-FE LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83530 1.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.
A146156C44
2.045,1.618 2.224,1.803 0.179,0.185 10 *1 2.125,0.954 2.125,1.618 false
*1 Adhesive


Apply adhesive to 2 or 3 threads of the oil pressure switch.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent.



b.

Using a 24 mm deep socket wrench, install the engine oil pressure switch.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)

NOTICE:

Do not start the engine for at least 1 hour after installation.



c.

Connect the engine oil pressure switch connector.


Hide 2.INSPECT FOR ENGINE OIL LEAK

Hide 51441C 3.INSTALL ENGINE UNDER COVER RH