Home › Engine / Hybrid System › 1KR-FE (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR › from 2020.07
RM36W0E _51 Engine / Hybrid System _091054 1KR-FE ENGINE CONTROL _0431476 ENGINE COOLANT TEMPERATURE SENSOR A

1KR-FE ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 16571C 2.DISCONNECT NO. 1 RADIATOR HOSE

Hide 89422 3.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

a.
A468345

Disconnect the engine coolant temperature sensor connector.


b.
A468346

Using a 19 mm deep socket wrench, remove the engine coolant temperature sensor from the cylinder head sub-assembly.

NOTICE:

If the engine coolant temperature sensor has been struck or dropped, replace it.



c.

Remove the gasket from the engine coolant temperature sensor.