Home › Engine / Hybrid System › 1KR-FE (ENGINE CONTROL) › KNOCK SENSOR › from 2020.07
RM36W0E _51 Engine / Hybrid System _091054 1KR-FE ENGINE CONTROL _0431477 KNOCK SENSOR A

1KR-FE ENGINE CONTROL  KNOCK SENSOR  REMOVAL  


PROCEDURE

Hide 89615 2.REMOVE KNOCK CONTROL SENSOR

a.
A468349

Disconnect the knock control sensor connector.


b.

Remove the bolt and knock control sensor from the cylinder block sub-assembly.

NOTICE:

If the knock control sensor has been struck or dropped, replace it.