| Stop and start system does not operate
|
Refer to "Stop and Start System does not Operate"
|
|
| Refer to "Stop and Start System does not Operate (Battery Condition)"
|
|
| Restarting after a short period of time from an idling stop
|
Refer to "Restarting after a Short Period of Time from an Idling Stop"
|
|
| After engine stops due to stop and start system, engine does not restart
|
Refer to "After Engine Stops due to Stop and Start System, Engine does not Restart"
|
|
| Failure to restart from IG-ON engine stall
|
Refer to "Failure to Restart from IG-ON Engine Stall"
|
|
| Stop and start cancel indicator does not operate
|
Combination meter assembly
|
|
| Indicator circuit (CAN communication system)
|
|
| Engine stop and start ECU
|
|
| Stop and start indicator does not operate
|
Combination meter assembly
|
|
| Indicator circuit (CAN communication system)
|
|
| Engine stop and start ECU
|
|
| Stop and start control cannot be canceled
|
ECAN terminal voltage
|
|
| Stop and start cancel switch circuit
|
|
| Multi-information display screen does not change after pressing steering pad switch assembly.
|
Stop and start priority control system
|
|
| Multi-information display screen changes without pressing steering pad switch assembly.
|
Stop and start priority control system
|
|
| Multi-information display screen does not change but control mode changes.
|
Stop and start priority control system
|
|
| Multi-information display screen changes but control mode does not change.
|
Stop and start priority control system
|
|
| Control mode returns to default mode after turning ignition switch to ON
|
Stop and start priority control system
|
|