Home › Drivetrain › EC6E (MANUAL TRANSMISSION / TRANSAXLE) › SHIFT LEVER ASSEMBLY › from 2020.07
RM36W0E _52 Drivetrain _089427 EC6E MANUAL TRANSMISSION / TRANSAXLE _0424702 SHIFT LEVER ASSEMBLY A

EC6E MANUAL TRANSMISSION / TRANSAXLE  SHIFT LEVER ASSEMBLY  REMOVAL  


PROCEDURE

Hide 1.SECURE VEHICLE

a.

Fully apply the parking brake and chock a wheel.

CAUTION:
·
C332327

Make sure to apply the parking brake and chock a wheel before performing this procedure.

·

If the vehicle is not secure and the shift lever is moved to neutral, the vehicle may suddenly move, possibly resulting in an accident or serious injury.




Hide 58910C 2.REMOVE REAR CONSOLE BOX ASSEMBLY

Hide 33820B 3.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY (for TMMF Made)

a.
C434070

Remove the clip and disconnect the transmission control select cable from the floor shift shift lever assembly.


b.
C434071

Disconnect the transmission control shift cable from the floor shift shift lever assembly.


c.
C434072

Disengage the 2 claws and disconnect the transmission control cable assembly from the floor shift shift lever assembly.

NOTICE:

Do not forcibly pull the transmission control cable assembly into the cabin.



Hide 33820B 4.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY (for TMC Made)

a.
C435423C01
1.917,1.583 1.917,1.167 true 2.75,1.25 2.417,1.25 true 2.75,1.167 3.01,1.375 0.26,0.208 10 true *2 1.833,1.583 2.094,1.792 0.26,0.208 10 true *1
*1 Transmission Control Select Cable
*2 Transmission Control Shift Cable


Remove the clip and disconnect the transmission control select cable from the floor shift shift lever assembly.


b.

Disconnect the transmission control shift cable from the floor shift shift lever assembly.


c.
C435418

Using a screwdriver, pull out the stopper of the transmission control select cable.

NOTICE:

Do not remove the stopper. If it is removed, reinstall it to its original position.



d.
C435410

Rotate the nut counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control select cable from the shift lever assembly.

NOTICE:
·

Do not rotate the nut excessively as the internal spring may jump out and the transmission control cable will not be reusable.

·

Do not forcibly pull the transmission control cable assembly into the cabin.




e.

Disconnect the transmission control shift cable from the floor shift lever assembly in the same manner as the transmission control select cable.


Hide 33530F 5.REMOVE FLOOR SHIFT SHIFT LEVER ASSEMBLY (for TMMF Made)

a.
C435419

Disengage the 4 clamps to disconnect the wire harness from the floor shift shift lever assembly.


b.
C435420

Remove the 4 bolts and floor shift shift lever assembly from the vehicle body.


Hide 33530F 6.REMOVE FLOOR SHIFT SHIFT LEVER ASSEMBLY (for TMC Made)

a.
C435419

Disengage the 4 clamps to disconnect the wire harness from the floor shift shift lever assembly.


b.
C435420

Remove the 4 bolts and floor shift shift lever assembly from the vehicle body.