33530F
1.INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY (for TMMF Made)
Install the floor shift shift lever assembly to the vehicle body with the 4 bolts.
Engage the 4 clamps to connect the wire harness to the floor shift shift lever assembly.
33530F
2.INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY (for TMC Made)
Install the floor shift shift lever assembly to the vehicle body with the 4 bolts.
Engage the 4 clamps to connect the wire harness to the floor shift shift lever assembly.
33820B
3.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY (for TMMF Made)
| *a | Twist the stopper |
| *b | Pull |
| *c | Return the stopper |
| *d | Lock Piece |
| *e | Stopper |
| *f | Adjuster Case |
Release the lock of the transmission control select cable length adjustment structure.
Twist the stopper.
Pull the lock piece outward from the adjuster case to release the lock.
Return the stopper.
Engage the 2 claws to connect the transmission control cable assembly to the floor shift shift lever assembly.
Do not forcibly pull the transmission control cable assembly into the cabin.
Connect the transmission control shift cable to the floor shift shift lever assembly.
Connect the transmission control select cable to the floor shift shift lever assembly and install the clip.
Make sure that the lock piece of the transmission control select cable length adjustment structure is facing upward when the transmission control select cable is connected.
Make sure that the transmission control select cable is securely installed.
33820B
4.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY (for TMC Made)
| *a | Nut |
| *b | Stopper |
| *c | Turn |
| *d | Push |
Rotate the nut counterclockwise approximately 180° and, while holding the nut in that position, press in the stopper.
| *a | Stopper |
Connect the transmission control shift cable to the floor shift lever assembly, check that the position of the stopper is the same as shown in the illustration.
Do not forcibly pull the transmission control cable assembly into the cabin.
Connect the transmission control select cable to the floor shift lever assembly, check tthat the position of the stopper is the same as shown in the illustration.
Do not forcibly pull the transmission control cable assembly into the cabin.
| *1 | Transmission Control Select Cable |
| *2 | Transmission Control Shift Cable |
Connect the transmission control shift cable to the floor shift lever assembly.
Connect the transmission control select cable to the floor shift lever assembly with the clip.
33820B
5.ADJUST TRANSMISSION CONTROL CABLE ASSEMBLY (for TMMF Made)
33820B
6.ADJUST TRANSMISSION CONTROL CABLE ASSEMBLY (for TMC Made)
58910C
7.INSTALL REAR CONSOLE BOX ASSEMBLY