Home › Drivetrain › C551 (MANUAL TRANSMISSION / TRANSAXLE) › DIFFERENTIAL CASE › from 2020.07
RM36W0E _52 Drivetrain _091208 C551 MANUAL TRANSMISSION / TRANSAXLE _0432177 DIFFERENTIAL CASE A

C551 MANUAL TRANSMISSION / TRANSAXLE  DIFFERENTIAL CASE  DISASSEMBLY  


PROCEDURE

Hide 41311E 1.REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING

a.
C232579C01
2.115,1.125 2.594,1 2.594,1 2.167,0.781 false 1.74,4 2.51,4.063 2.51,4.063 1.677,3.833 true 1.792,3.938 2.51,4.063 true 2.698,0.917 3.031,1.104 0.333,0.188 10 false SST 2.583,4 2.917,4.188 0.333,0.188 10 false SST 0.344,0.948 0.51,1.104 0.167,0.156 10 false *a 2.427,0.208 2.594,0.365 0.167,0.156 10 false *b
*a Hold
*b Turn


Using SST, remove the front differential case front tapered roller bearing.

SST
09950-40011  (09951-04010, 09952-04010, 09953-04010, 09954-04010, 09954-04010, 09955-04061, 09957-04010, 09958-04011)
09950-60010  (09951-00270, 09951-00380, 09952-06010)

HINT:

Set the claw of SST against the bearing inner race at the indented part of the differential case.


NOTICE:

When attaching SST to the front differential case front tapered roller bearing, the claws of SST cannot fully grasp the bearing and the bearing may be damaged. Therefore, the bearing cannot be reused.



Hide 41311F 2.REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING

a.
G021404C02
0.823,1.313 0.49,1.115 0.49,1.115 0.875,0.896 false 0.073,1.031 0.5,1.229 0.427,0.198 10 false SST 0.125,0.479 0.292,0.635 0.167,0.156 10 false *a 2.073,0.281 2.24,0.438 0.167,0.156 10 false *b
*a Hold
*b Turn


Using SST, remove the front differential case rear tapered roller bearing.

SST
09950-00020  
09950-00030  

HINT:

Set the claw of SST against the bearing inner race at the indented part of the differential case.



Hide 41221 3.REMOVE FRONT DIFFERENTIAL RING GEAR

a.
G021405C05
2.721,0.1 2.926,0.295 0.205,0.195 10 *a 2.345,0.854 2.681,0.252 2.681,0.252 2.234,0.853 false
*a Matchmark


Place matchmarks on the front differential ring gear and the front differential case.


b.

Remove the 6 bolts.


c.
G021406

Using a plastic-faced hammer, remove the front differential ring gear from the front differential case.


Hide 41342A 5.REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

a.
G021407

Using a pin punch and hammer, tap out the front differential pinion shaft straight pin.


Hide 41311 6.REMOVE FRONT DIFFERENTIAL CASE

a.
G021408

Remove the front No. 1 differential pinion shaft from the differential case.


b.

Remove the 2 front differential pinions and 2 front differential side gears from the differential case.


c.

Remove the 2 front differential pinion thrust washers and 2 front differential side gear thrust washers from each gear.