Home › Vehicle Exterior › ACOUSTIC VEHICLE ALERTING SYSTEM › ACOUSTIC VEHICLE ALERTING SYSTEM › from 2020.07
RM36W0E _59 Vehicle Exterior _091206 ACOUSTIC VEHICLE ALERTING SYSTEM _0432211 ACOUSTIC VEHICLE ALERTING SYSTEM C

ACOUSTIC VEHICLE ALERTING SYSTEM  ACOUSTIC VEHICLE ALERTING SYSTEM  B135013  Vehicle Proximity Notification Speaker Circuit Open  B135019  Vehicle Proximity Notification Speaker Circuit Current Above Threshold  


DESCRIPTION

The vehicle approaching speaker assembly circuit consists of the vehicle approaching speaker controller and vehicle approaching speaker assembly.

This DTC is stored when a malfunction is detected in the vehicle approaching speaker assembly circuit or vehicle approaching speaker controller.

DTC No. Detection Item DTC Detection Condition Trouble Area
B135013 Vehicle Proximity Notification Speaker Circuit Open
Detection condition(1):

The ignition switch is ON


Detection condition(2):

IG power source voltage is 10 V or more.


Malfunction status:

While the vehicle approaching notification sound is stopped, the sound generation output voltage is monitored internally by the ECU, and the conditions for an open circuit, short to power supply, or short to ground occur continuously.


Malfunction duration:

5 seconds or more


·

Vehicle approaching speaker controller

·

Vehicle approaching speaker assembly

·

Harness or connector


B135019 Vehicle Proximity Notification Speaker Circuit Current Above Threshold
Detection condition(1):

The ignition switch is ON


Detection condition(2):

IG power source voltage is 9 V or more.


Malfunction status:

While the vehicle approaching notification sound is being emitted, abnormal output conditions within the ECU occur continuously.


Malfunction duration:

1 seconds or more


·

Vehicle approaching speaker controller

·

Vehicle approaching speaker assembly

·

Harness or connector



WIRING DIAGRAM

E402276E46
1.094,1.917 1.552,2.115 0.458,0.198 10 false A61 1.083,2.073 2.375,2.583 1.292,0.51 10 false Vehicle Approaching Speaker Assembly 4.74,1.938 5.198,2.135 0.458,0.198 10 false A69 4.76,2.094 6.042,2.563 1.281,0.469 10 false Vehicle Approaching Speaker Controller 2.104,0.969 2.563,1.167 0.458,0.198 10 false 2 2.104,1.375 2.563,1.573 0.458,0.198 10 false 1 4.75,0.99 5.208,1.188 0.458,0.198 10 false 7 4.75,1.375 5.208,1.573 0.458,0.198 10 false 8 4.938,1.073 5.396,1.271 0.458,0.198 10 false SP+ 4.938,1.49 5.396,1.688 0.458,0.198 10 false SP- 1.896,1.448 2.26,1.646 0.365,0.198 10 false - 1.875,1.052 2.333,1.25 0.458,0.198 10 false +

PROCEDURE

1.INSPECT VEHICLE APPROACHING SPEAKER ASSEMBLY

OK

2.CHECK HARNESS AND CONNECTOR (VEHICLE APPROACHING SPEAKER ASSEMBLY - VEHICLE APPROACHING SPEAKER CONTROLLER)

NG

REPLACE VEHICLE APPROACHING SPEAKER ASSEMBLY

2.CHECK HARNESS AND CONNECTOR (VEHICLE APPROACHING SPEAKER ASSEMBLY - VEHICLE APPROACHING SPEAKER CONTROLLER)
a.

Disconnect the A69 vehicle approaching speaker controller connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A61-2 (+) - A69-7 (SP+) Always Below 1 Ω
A61-1 (-) - A69-8 (SP-) Always Below 1 Ω
A61-2 (+) or A69-7 (SP+) - Body ground Always 10 kΩ or higher
A61-1 (-) or A69-8 (SP-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR