Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL (for Gasoline Model LHD) › from 2020.07
RM36W0E _54 Brake _088656 BRAKE SYSTEM (OTHER) _0432261 BRAKE PEDAL(for Gasoline Model LHD) A

BRAKE SYSTEM (OTHER)  BRAKE PEDAL(for Gasoline Model LHD)  INSTALLATION  


PROCEDURE

Hide 47121 1.INSTALL BRAKE PEDAL PAD

a.

Install the brake pedal pad to the brake pedal support assembly.


Hide 47110 2.INSTALL BRAKE PEDAL SUPPORT ASSEMBLY

a.
C436704E01
2.719,1.25 2.885,1.5 0.167,0.25 10 true 1 0.708,0.479 0.875,0.729 0.167,0.25 10 true 3 1.031,1.271 1.229,1.521 0.198,0.25 10 true 2 2.344,0.438 2.542,0.635 0.198,0.198 10 true 4

Engage the 3 clamps to install the wire harness to the brake pedal support assembly.


b.

Temporarily install the brake pedal support assembly with the 2 bolts and 2 nuts.


c.

Tighten the 2 nuts and 2 bolts in the order shown in the illustration.

Torque:
12.7 N*m (130 kgf*cm, 9 ft.*lbf)


d.

Install 2 new clips.


e.

Engage the clamp to install the wire harness to the brake pedal support assembly.


Hide 47264A 3.INSTALL PUSH ROD PIN

a.
C436707C01
0,0 0,0 false
V100135

Lithium soap base glycol grease


Apply lithium soap base glycol grease to the push rod pin and installation hole of the brake pedal support assembly.


b.

Connect the brake master cylinder push rod clevis to the brake pedal support assembly with the push rod pin, and install a new clip.

NOTICE:

Be sure to install the push rod pin in the correct direction.



Hide 47101A 4.INSTALL BRAKE PEDAL RETURN SPRING

a.
C436701

Install the brake pedal return spring to the brake pedal support assembly as shown in the illustration.


Hide 84345 5.INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

Hide 84340 6.INSTALL STOP LIGHT SWITCH ASSEMBLY

Hide 7.INSTALL STEERING COLUMN ASSEMBLY