Use the same procedure for LHD and RHD vehicles.
The procedure described below is for the LHD vehicles.
Use the same procedure as for the LH and RH sides.
The procedure described below is for the LH side.
74232
1.REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT ARMREST BASE UPPER PANEL (for Driver Side)
74231
2.REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT ARMREST BASE UPPER PANEL (for Front Passenger Side)
67656
3.REMOVE FRONT DOOR TRIM GARNISH
4.REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY
Disconnect the connector.
Disengage the claws to remove the No. 1 interior illumination light assembly.