Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
85535B
1.INSTALL NO. 1 POWER OUTLET SOCKET COVER
|
Install in this Direction |
Engage the claws to install the No. 1 power outlet socket cover as shown in the illustration.
85530
2.INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY
|
Install in this Direction |
Engage the claw to install the No. 1 power outlet socket assembly as shown in the illustration.
58810J
3.INSTALL FRONT CONSOLE BOX SUB-ASSEMBLY
33554
4.INSTALL SHIFT LEVER CAP (for CVT)
33504F
5.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for CVT)
for TMC Made:
Click hereDrivetrain>K320 (MULTIDRIVE / CVT)>SHIFT LEVER KNOB (for TMC Made)>INSTALLATION
for TMMF Made:
Click hereDrivetrain>K320 (MULTIDRIVE / CVT)>SHIFT LEVER KNOB (for TMMF Made)>INSTALLATION
33504F
6.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
55407B
7.INSTALL SWITCH HOLE BASE SUB-ASSEMBLY
55432B
8.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL
55479E
9.INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL GARNISH