55990B
1.REMOVE LOWER DEFROSTER NOZZLE ASSEMBLY
Disengage the claws and guides to remove the lower defroster nozzle assembly.
88897K
2.REMOVE COOLER PIPE GROMMET
Remove the cooler pipe grommet.
88515
3.REMOVE COOLER EXPANSION VALVE
Using a 4 mm hexagon socket wrench, remove the 2 hexagon bolts and cooler expansion valve.
Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.
88897P
4.REMOVE ASPIRATOR
Disengage the claws and guide to remove the aspirator.
87211A
5.REMOVE NO. 2 AIR DUCT
Remove the screw.
Disengage the claws to remove the No. 2 air duct.
87114L
6.REMOVE NO. 2 HEATER COVER (except Cold Area Specification Vehicles)
Disengage the claws to remove the No. 2 heater cover.
87212K
7.REMOVE NO. 6 REAR AIR DUCT (for Cold Area Specification Vehicles)
Disengage the claws to remove the No. 6 rear air duct.
88539J
8.REMOVE DRAIN COOLER HOSE
Remove the drain cooler hose.
82210K
9.REMOVE AIR CONDITIONING HARNESS ASSEMBLY
for Automatic Air Conditioning System:
Disconnect the 4 connectors.
Disengage guides to remove the air conditioning harness assembly.
for Manual Air Conditioning System Dual Layer Type:
Disconnect the 2 connectors.
Disengage guides to remove the air conditioning harness assembly.
88650N
10.REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
Remove the screw.
Disengage the guides to remove the air conditioning amplifier assembly as shown in the illustration.
82143C
11.REMOVE NO. 3 INSTRUMENT PANEL WIRE (for Cold Area Specification Vehicles)
87130D
12.REMOVE BLOWER ASSEMBLY
87050C
13.REMOVE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)
Remove the 3 screws and No. 1 air conditioning radiator damper servo sub-assembly.
55906A
14.REMOVE DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
Disengage the guide and claws to remove the defroster damper control cable sub-assembly.
55909A
15.REMOVE AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
Disengage the guide and claws to remove the air mix damper control cable sub-assembly.
87114B
16.REMOVE HEATER COVER (for Cold Area Specification Vehicles)
Disengage the claw and guide.
Remove the screw and heater cover.
87114B
17.REMOVE HEATER COVER (except Cold Area Specification Vehicles)
Remove the screw and heater cover.
87710G
18.REMOVE QUICK HEATER ASSEMBLY (for Cold Area Specification Vehicles)
Remove the quick heater assembly.
87124B
19.REMOVE HEATER CLAMP
Disengage the claws to remove the heater clamp.
87107A
20.REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
Remove the heater radiator unit sub-assembly as shown in the illustration.
88501
21.REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
| *a | Clamp |
| *b | Guide |
Disengage the clamp and guides.
Remove the 2 screws.
Disengage the claws and guides to remove the upper heater case with No. 1 cooler evaporator sub-assembly.
Remove the No. 1 cooler evaporator sub-assembly with No. 1 cooler thermistor from the upper heater case.
88625
22.REMOVE NO. 1 COOLER THERMISTOR
87220
23.REMOVE AIR DUCT ASSEMBLY
Remove the 3 retainers.
Separate the front panel silencer as shown in the illustration.
Remove the 2 nuts and air duct assembly.