Use the same procedure for RHD and LHD vehicles.
The following procedure is for LHD vehicles.
55607
1.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)
87103B
2.REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for Manual Air Conditioning System)
for Single Layer Type:
Disconnect the connector.
Remove the 3 screws and blower motor with fan sub-assembly.
for Double Layer Type:
Disconnect the 3 connectors and disengage the clamp.
Remove the 3 screws and blower motor with fan sub-assembly.
87103B
3.REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for Automatic Air Conditioning System)
Disconnect the connector.
Remove the 3 screws and blower motor with fan sub-assembly.