Use the same procedure for TMC Made and TMMF Made vehicles.
The procedure below is for TMMF Made vehicles.
45287
1.REMOVE LOWER STEERING COLUMN COVER
45286B
2.REMOVE UPPER STEERING COLUMN COVER
84329
3.REMOVE TURN SIGNAL SWITCH
Remove the 2 screws.
Turn the steering wheel assembly to the left.
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the turn signal switch as shown in the illustration.
If the claw is pulled with excessive force, it may break.