Use the same procedure for TMC Made and TMMF Made vehicles.
The procedure below is for TMMF Made vehicles.
84319
1.INSTALL STEERING WHEEL SWITCH HOUSING
When reusing the steering wheel switch housing:
Using pliers, expand the clamp and temporarily install the steering wheel switch housing as shown in the illustration.
|
Install in this Direction |
While holding the clamp expanded, engage the claw as shown in the illustration.
Release the clamp to install the steering wheel switch housing as shown in the illustration.
When installing a new steering wheel switch housing:
Temporarily install the steering wheel switch housing.
|
Install in this Direction |
Engage the claw as shown in the illustration.
Remove the pin to install the steering wheel switch housing as shown in the illustration.
84329
2.INSTALL TURN SIGNAL SWITCH
84650
3.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
84306
4.INSTALL SPIRAL CABLE SUB-ASSEMBLY