Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55606
1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
84340
2.REMOVE STOP LIGHT SWITCH ASSEMBLY
Disconnect the connector.
|
Turn in this Direction |
Turn the stop light switch assembly counterclockwise and remove it.
84345
3.REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER
| *a | Protective Tape |
Using a screwdriver, disengage the claw to remove the stop light switch mounting adjuster.
The stop light switch mounting adjuster must not be reused.