52023
1.INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY (w/ Reinforcement)
Install the rear bumper reinforcement sub-assembly with 6 bolts.
52156A
2.INSTALL REAR BUMPER SIDE SUPPORT LH
Install the rear bumper side support LH with screw.
w/ Blind Spot Monitor System:
Engage the wire harness clamp.
52155A
3.INSTALL REAR BUMPER SIDE SUPPORT RH
Use the same procedure as for the LH side.
4.INSTALL REAR COMBINATION LIGHT ASSEMBLY LH
for Halogen Headlight:
Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for Halogen Headlight)>INSTALLATION
for LED Headlight:
Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for LED Headlight)>INSTALLATION
5.INSTALL REAR COMBINATION LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
52576
6.INSTALL REAR BUMPER SIDE RETAINER LH (for TMC Made)
Engage the guide and claw to install the rear bumper side retainer LH.
Engage the clips as shown in the illustration.
w/ Blind Spot Monitor System:
Engage the wire harness clamps.
52575
7.INSTALL REAR BUMPER SIDE RETAINER RH (for TMC Made)
Use the same procedure as for the LH side.
52576
8.INSTALL REAR BUMPER SIDE RETAINER LH (for TMMF Made)
Engage the guide and claw to install the rear bumper side retainer LH.
Install the 2 screws.
w/ Blind Spot Monitor System:
Engage the wire harness clamps.
52575
9.INSTALL REAR BUMPER SIDE RETAINER RH (for TMMF Made)
Use the same procedure as for the LH side.
52453
10.INSTALL REAR BUMPER CENTER GUARD
for TMC Made:
Engage the claws to install the rear bumper center guard.
for TMMF Made:
Engage the claws and guides to install the rear bumper center guard.
Install the 2 clips.
81920
11.INSTALL REFLEX REFLECTOR ASSEMBLY LH
Engage the guide and claw to install the reflex reflector assembly LH.
Install the screw.
81910
12.INSTALL REFLEX REFLECTOR ASSEMBLY RH
Use the same procedure as for the LH side.
82182
13.INSTALL NO. 2 LUGGAGE ROOM WIRE
w/ Parking Support Brake System:
Engage the clamps to install the No. 2 luggage room wire.
w/o Parking Support Brake System:
Engage the clamps to install the No. 2 luggage room wire.
14.INSTALL BACK-UP LIGHT ASSEMBLY
89348R
15.INSTALL REAR CORNER ULTRASONIC SENSOR RETAINER (w/ Parking Support Brake System)
89348S
16.INSTALL REAR CENTER ULTRASONIC SENSOR RETAINER (w/ Parking Support Brake System)
89342
17.INSTALL REAR CORNER ULTRASONIC SENSOR (w/ Parking Support Brake System)
89342A
18.INSTALL REAR CENTER ULTRASONIC SENSOR (w/ Parking Support Brake System)