Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › CLEARANCE WARNING BUZZER (for RHD) › from 2020.07
RM36W0E _56 Audio / Visual / Telematics _088657 PARK ASSIST / MONITORING _0432921 CLEARANCE WARNING BUZZER(for RHD) A

PARK ASSIST / MONITORING  CLEARANCE WARNING BUZZER(for RHD)  INSTALLATION  


PROCEDURE

Hide 89343C 1.INSTALL NO. 1 CLEARANCE WARNING BUZZER

a.
E437236

Engage the clamp to install the No. 1 clearance warning buzzer.


Hide 2.INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY RH

a.

Engage the clamps.

E433357


b.

Connect the each connector.


c.

Install the instrument panel junction block assembly RH with the 2 nuts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 4.CONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

Hide 5. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART