The motor relay is built into the brake booster with master cylinder assembly.
When the ABS, TRC, VSC, brake hold or brake assist is operating, the electric brake booster (brake booster with master cylinder assembly) turns the ABS motor relay ON and operates the motor relay inside the brake booster with master cylinder assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from |
|---|---|---|---|---|
| C12BF1C | Electronic Brake Booster Motor "A" Drive Circuit Circuit Voltage Out of Range | Motor relay drive voltage abnormality detected. | Electric brake booster (brake booster with master cylinder assembly) | Brake Booster |
| C12BF49 | Electronic Brake Booster Motor "A" Drive Circuit Internal Electronic Failure | Motor relay drive circuit abnormality detected. | Electric brake booster (brake booster with master cylinder assembly) | Brake Booster |
| C12BF87 | Electronic Brake Booster Motor "A" Drive Circuit Missing Message | Motor relay drive circuit abnormality detected. | Electric brake booster (brake booster with master cylinder assembly) | Brake Booster |
| C12BF96 | Electronic Brake Booster Motor "A" Drive Circuit Component Internal Failure | Motor relay internal abnormality detected. | Electric brake booster (brake booster with master cylinder assembly) | Brake Booster |
| C12BF9E | Electronic Brake Booster Motor "A" Drive Circuit Stuck On | Motor relay drive circuit low voltage detected. | Electric brake booster (brake booster with master cylinder assembly) | Brake Booster |
After replacing the electric brake booster (brake booster with master cylinder assembly), perform "Calibration" after performing "Reset Memory".
Choose the model to be inspected
| Result | Proceed to |
|---|---|
| for LHD | A |
| for RHD | B |
A
B
Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE MASTER CYLINDER (for HV Model LHD)>REMOVAL
| Proceed to |
|---|
| NEXT |
NEXT
Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE MASTER CYLINDER (for HV Model RHD)>REMOVAL
| Proceed to |
|---|
| NEXT |
NEXT