Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
55313A
1.REMOVE INSTRUMENT MAIN PANEL
55408F
2.REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
3.REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY WITH BRACKET
Do not touch the speaker cone.
Remove the 2 screws and No. 1 instrument panel speaker panel sub-assembly with bracket.
Disconnect the connector.
86160L
4.REMOVE FRONT NO. 4 SPEAKER ASSEMBLY
Do not touch the speaker cone.
Remove the 2 nuts and the front NO. 4 speaker assembly.