Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
1.REMOVE FRONT BUMPER ASSEMBLY (for 5 Door)
2.REMOVE HEADLIGHT ASSEMBLY
|
Protective Tape |
Apply protective tape around the headlight assembly as shown in the illustration.
for TMC Made:
Disengage the clamps and disconnect the 6 connectors.
for TMMF Made:
Disengage the clamps and disconnect the 6 connectors.
Remove the 3 screws.
|
Remove in this Direction |
Remove the headlight assembly as shown in the illustration.