Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
1.INSTALL HEADLIGHT ASSEMBLY
|
Install in this Direction |
Temporarily install the headlight assembly as shown in the illustration.
Install the headlight assembly with the 3 screws.
for TMC Made:
Connect the 2 connectors and engage the clamp.
for TMMF Made:
Connect the 2 connectors and engage the clamp.
Remove the protective tape.
2.INSTALL FRONT BUMPER ASSEMBLY
for 5 Door:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for 5 Door)>INSTALLATION
for 3 Door:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for 3 Door)>INSTALLATION
3.ADJUST HEADLIGHT AIMING