Home › General › MAINTENANCE › G16E-GTS DRIVE BELT › from 2020.09
RM36W0E _V1 General _088300 MAINTENANCE _0447818 G16E-GTS DRIVE BELT A

MAINTENANCE  G16E-GTS DRIVE BELT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:

Use a Toyota genuine belt or an equivalent high strength belt when replacing the belt. If a high strength belt is not used, the durability of the belt may be insufficient. A high strength belt is reinforced with an aramid core and is stronger than other belts with a PET (polyester) or PEN (polyethylene naphthalate) core.


PROCEDURE

Hide 51410 1.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 51441C 2.REMOVE ENGINE UNDER COVER RH

Hide 16361A 3.REMOVE FAN AND GENERATOR V BELT

a.
A479664

Release the V-ribbed belt tension by turning the V-ribbed belt tensioner assembly counterclockwise.


b.

Turn the V-ribbed belt tensioner assembly counterclockwise to align its holes, and then insert a 5 mm hexagon wrench to secure the V-ribbed belt tensioner assembly.


c.

Remove the fan and generator V belt from the V-ribbed belt tensioner assembly.