Use the same procedure for the LH side and RH side.
The following procedure is for the LH side.
1.REMOVE REAR WHEEL
2.SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY
42491
3.REMOVE PARKING BRAKE SHOE ADJUSTING HOLE PLUG
42432
4.REMOVE REAR DISC
46550G
5.REMOVE NO. 3 PARKING BRAKE SHOE RETURN TENSION SPRING
Using SST, remove the No. 3 parking brake shoe return tension spring.
46550E
6.REMOVE NO. 2 PARKING BRAKE SHOE RETURN TENSION SPRING
Using SST, remove the No. 2 parking brake shoe return tension spring.
47614
7.REMOVE PARKING BRAKE SHOE STRUT
Pull the No. 1 parking brake shoe assembly towards the front of the vehicle by hand.
Remove the parking brake shoe strut.
46550A
8.REMOVE NO. 1 PARKING BRAKE SHOE RETURN TENSION SPRING
Using SST, remove the No. 1 parking brake shoe return tension spring.
47406A
9.REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET
Pull the No. 1 parking brake shoe assembly towards the front of the vehicle by hand.
Remove the parking brake shoe adjusting screw set.
46580
10.REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY
Using SST, remove the parking brake shoe hold down spring, parking brake shoe hold down spring pin and No. 1 parking brake shoe assembly.
46590
11.REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY
Using SST, remove the parking brake shoe hold down spring and parking brake shoe hold down spring pin, and separate the No. 2 parking brake shoe assembly.
Pull out the pin of the parking brake shoe lever from the No. 2 parking brake shoe assembly, and remove the No. 2 parking brake shoe assembly.
47612
12.REMOVE PARKING BRAKE SHOE LEVER
Using needle-nose pliers, remove the parking brake shoe lever from the parking brake cable assembly.