Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
55479E
1.REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL GARNISH
55432B
2.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL
55407B
3.REMOVE SWITCH HOLE BASE SUB-ASSEMBLY
33504F
4.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for CVT)
for TMC Made:
Click hereDrivetrain>K320 (MULTIDRIVE / CVT)>SHIFT LEVER KNOB (for TMC Made)>REMOVAL
for TMMF Made:
Click hereDrivetrain>K320 (MULTIDRIVE / CVT)>SHIFT LEVER KNOB (for TMMF Made)>REMOVAL
33504F
5.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
33554
6.REMOVE SHIFT LEVER CAP (for CVT)
58810J
7.REMOVE FRONT CONSOLE BOX SUB-ASSEMBLY (for 5 Door)
58810J
8.REMOVE CONSOLE BOX ASSEMBLY (for 3 Door)
85530
9.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
for 5 Door:
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw to remove the No. 1 power outlet socket assembly as shown in the illustration.
for 3 Door:
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw to remove the No. 1 power outlet socket assembly as shown in the illustration.
85535B
10.REMOVE NO. 1 POWER OUTLET SOCKET COVER
for 5 Door:
|
Remove in this Direction |
Disengage the claws to remove the No. 1 power outlet socket cover as shown in the illustration.
for 3 Door:
|
Remove in this Direction |
Disengage the claws to remove the No. 1 power outlet socket cover as shown in the illustration.