89413B
1.INSTALL TRANSMISSION REVOLUTION SENSOR
Clean the bolt and installation hole in the manual transmission case.
Coat a new O-ring with gear oil and install it to the transmission revolution sensor.
| *a | Adhesive |
Apply adhesive to 2 or 3 threads on the end of the bolt.
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
Make sure to install the bolt immediately after applying adhesive to prevent foreign matter from attaching to it.
Install the transmission revolution sensor to the manual transmission case with the bolt.
Connect the transmission revolution sensor connector.
51410
2.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY