Home › Drivetrain › AXLE AND DIFFERENTIAL › DIFFERENTIAL MOUNT CUSHION › from 2020.09
RM36W0E _52 Drivetrain _087260 AXLE AND DIFFERENTIAL _0447537 DIFFERENTIAL MOUNT CUSHION A

AXLE AND DIFFERENTIAL  DIFFERENTIAL MOUNT CUSHION  INSTALLATION  


PROCEDURE

Hide 41651 1.INSTALL REAR NO. 1 DIFFERENTIAL MOUNT CUSHION

a.

Using SST, install a new rear No. 1 differential mount cushion.

SST
09316-20011  
09570-24011  

C450357C01
5.729,1.292 5.646,1.563 5.646,1.563 5.833,1.302 false 6.344,1.667 6.104,1.49 false 6.49,0.365 6.198,0.521 false 4.188,2.313 4.469,2.667 0.281,0.354 10 false *d 2.583,2.438 2.833,2.656 0.25,0.219 10 false *c 5.49,1.583 5.823,1.781 0.333,0.198 10 false SST 6.365,1.625 6.698,1.823 0.333,0.198 10 false *1 6.531,0.292 6.865,0.49 0.333,0.198 10 false SST 5.406,0.271 5.74,0.469 0.333,0.198 10 false *b 6.083,2.24 6.417,2.438 0.333,0.198 10 false *a
*1 Rear Suspension Member Sub-assembly - -
*a 0° +/- 3° *b 15.0 to 16.0 mm (0.591 to 0.630 in.)
*c Turn *d Hold
V100135

Turning Direction
V100136

Front of Vehicle
V100137

SST Bolt Position - -


NOTICE:
·

Make sure that the rear No. 1 differential mount cushion is aligned within 3° from the center.

·

Install the rear No. 1 differential mount cushion so that the protrusion is positioned as shown in the illustration.

·

Be sure to use the correct combination of SST.

·

Before using SST, apply grease to SST bolt.

·

Temporarily install the rear No. 1 differential mount cushion to the rear suspension member sub-assembly in order to prevent it from tilting, and then install SST.

·

Make sure that SST contacts the entire circumference of the rear No. 1 differential mount cushion.

·

Do not tilt the bolts of SST.




Hide 41110 2.INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY