Home › Engine / Hybrid System › STOP AND START › VACUUM SENSOR ASSEMBLY › 2020.09–2021.11
RM36W0E _51 Engine / Hybrid System _090986 STOP AND START _0431196 VACUUM SENSOR ASSEMBLY A

STOP AND START  VACUUM SENSOR ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 1.INSTALL VACUUM SENSOR GROMMET

a.

Install the new vacuum sensor grommet to the brake booster assembly.


Hide 89420H 2.INSTALL VACUUM SENSOR ASSEMBLY

a.
A468074C01
0.052,0.229 0.771,0.958 0.719,0.729 12 false *A 0.083,2.438 0.604,2.958 0.521,0.521 12 false *B 1.5,1.854 1.719,2.115 0.219,0.26 10 false *a 1.823,4.094 2.083,4.323 0.26,0.229 10 false *a
*A for LHD
*B for RHD
*a 32° +/- 5°


for TMMF Made:

i.

Install the vacuum sensor assembly to the brake booster assembly so that the vacuum sensor assembly is angled as shown in the illustration.


ii.

Connect the vacuum sensor assembly connector to the vacuum sensor assembly.



b.
A476530C01
0.052,0.094 0.771,0.823 0.719,0.729 12 false *A 0.083,2.396 0.604,2.917 0.521,0.521 12 false *B 2.031,0.542 2.281,0.688 0.25,0.146 10 true *a 1.26,2.719 1.458,2.885 0.198,0.167 10 true *a
*A for LHD
*B for RHD
*a 45° +/- 20°


for TMC Made:

i.

Install the vacuum sensor assembly to the brake booster assembly so that the vacuum sensor assembly is angled as shown in the illustration.


ii.

Connect the vacuum sensor assembly connector to the vacuum sensor assembly.



Hide 47201 3.INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY (for Gasoline Model TMMF Made LHD)

Hide 47201 4.INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY (for Gasoline Model TMMF Made RHD)

Hide 47201 5.INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY (for Gasoline Model TMC Made LHD)

Hide 47201 6.INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY (for Gasoline Model TMC Made RHD)