Refer to DTC C05121F.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from |
|---|---|---|---|---|
| C05123A | Right Rear Wheel Speed Sensor Signal Has Too Many Pulses | When not in Dealer Mode (Signal Check) or Inspection Mode, the output of the speed sensor detected by the skid control ECU (brake booster with master cylinder assembly) is too high for 5 second or more. | Rear speed sensor RH (rear axle hub and bearing assembly RH) | Brake |
After replacing or removing and installing a speed sensor rotor, perform Dealer Mode (Signal Check) inspection to confirm that the speed sensors are operating correctly.
| Proceed to |
|---|
| NEXT |
NEXT