Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type with TAS Type) › from 2021.04
RM36W0E _56 Audio / Visual / Telematics _088597 AUDIO / VIDEO _0475155 AUDIO AND VISUAL SYSTEM(for Radio and Display Type with TAS Type) L

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type with TAS Type)  PRECAUTION  


PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL


NOTICE:

After the ignition switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 120 seconds before disconnecting the cable from the negative (-) auxiliary battery terminal.



PRECAUTION FOR AUDIO AND VISUAL SYSTEM


NOTICE:
·

When performing the following work, the audio and visual system may restart when turning the ignition switch to ACC (due to radio and display receiver assembly certification).

-

Repair or replace the negative (-) auxiliary battery terminal due to it being disconnected or depleted.

-

The radio and display receiver assembly replacement or removal and installation.


·

When replacing the telephone transceiver assembly, make sure to replace it with a new one. (w/ Telephone Transceiver Assembly)



a.

If any of the following parts are replaced, refer to Initialization in Repair Instruction.

Click hereGeneral>SETUP>WHEN REPLACING OR REMOVING/INSTALLING PARTS>WORK PROCEDURE

·

Telephone transceiver assembly*


*: w/ Telephone Transceiver Assembly