Home › Engine / Hybrid System › G16E-GTS (LUBRICATION) › OIL PRESSURE AND TEMPERATURE SENSOR › from 2021.11
RM36W0E _51 Engine / Hybrid System _095911 G16E-GTS LUBRICATION _0449902 OIL PRESSURE AND TEMPERATURE SENSOR A

G16E-GTS LUBRICATION  OIL PRESSURE AND TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 51410 1.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 89448D 2.REMOVE OIL PRESSURE AND TEMPERATURE SENSOR

a.
A497266

Disconnect the oil pressure and temperature sensor connector.


b.
A497267

Using a 24 mm deep socket wrench, remove the oil pressure and temperature sensor.

NOTICE:

If the oil pressure and temperature sensor is dropped or subjected to a strong impact, replace it with a new one.