The ABS solenoid relay is built into the skid control ECU in the brake actuator assembly. The ABS solenoid relay supplies power to each solenoid.
The skid control ECU (brake actuator assembly) detects an ABS solenoid relay malfunction by performing a self-check and relay operation check.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from |
|---|---|---|---|---|
| C143A7E | ABS Solenoid Control Module Actuator Stuck On | When an ABS solenoid relay OFF request is sent, the ABS solenoid relay remains ON for 0.08 second or more. | Skid control ECU (brake actuator assembly) | Brake |
| C143A7F | ABS Solenoid Control Module Actuator Stuck Off | When an ABS solenoid relay ON request is sent, the ABS solenoid relay remains OFF for 0.08 second or more. | Skid control ECU (brake actuator assembly) | Brake |
After replacing the skid control ECU (brake actuator assembly), perform yaw rate and acceleration sensor zero point calibration and store system information memorization.
Check the vehicle specification.
| Result | Proceed to |
|---|---|
| LHD | A |
| RHD | B |
A
B