2005-2008 Yaris · Service Manual BODY ELECTRICAL

IDENTIFICATION OF NOISE SOURCE

Troubleshooting · Vehicles built from Aug 2005


RADIO WAVE BAND

  1. Radio frequency band

    1. Radio broadcasts use the radio frequency bands shown in the table below.
      E108734E02


SERVICE AREA

  1. E108735E01
    The broadcast ranges for AM and FM are very different. Sometimes an AM broadcast can be received very clearly but FM stereo cannot. FM stereo has the smallest service area, and is prone to picking up static and other types of interference (for example, noise).


RECEPTION PROBLEMS

HINT:
Besides the problem of static, there are other problems, such as "phasing", "multipath" and "fade out". These problems are caused by the nature of the radio waves themselves, not by electrical noise.

  1. I100011E02
    AM broadcasts are susceptible to electrical interference called phasing. Occurring only at night, phasing is the interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off the ionosphere and the other signal is received directly from the transmitter.

  2. I100012E02
    Multipath is a type of interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off buildings or mountains and the other signal is received directly from the transmitter.

  3. I100013E02
    Fade out is caused by objects (buildings, mountains, etc.) that deflect away part of a signal, resulting in a weaker signal when the object is between the transmitter and the vehicle. High frequency radio waves, such as FM broadcasts, are easily deflected by obstructions. Low frequency radio waves, such as AM broadcasts, are much more difficult to deflect.


NOISE PROBLEMS
  1. Technicians must have a clear understanding about the noise problems of the customer's vehicle. Use the following table to diagnose the problems.

    Radio Wave
    Condition in Which Noise Occurs
    Presumable Cause
    AM
    Noise occurs in specific area
    Strong possibility of foreign noise
    AM
    Noise occurs when broadcasting faint
    1. Same program may be broadcasted from various local stations
    2. If program is same, one of those may be tuned in
    AM
    Noise occurs only at night
    Strong possibility of beats from distant broadcasting
    FM
    Noise occurs at specific place during driving
    Strong possibility of multipath noise and fading noise caused by changes in FM frequency.

    HINT:
    When the noise does not match the examples above, refer to "Reception Problems". Check the descriptions about phasing and multipath.

← HOW TO PROCEED WITH TROUBLESHOOTING (from Jan 2006)PROBLEM SYMPTOMS TABLE (Aug 2005 – Dec 2005) →