DISASSEMBLY
Removal / installation · Vehicles built from Nov 2005
| 1.
REMOVE FRONT DISC BRAKE PISTON |
 |
Place a shop rag or piece of cloth between the piston and disc brake cylinder.
Apply compressed air to remove the piston from the disc brake cylinder.
- CAUTION:
- Do not place your fingers in front of the piston when applying compressed air.
- NOTICE:
- Do not spatter the brake fluid.
| 2.
REMOVE PISTON SEAL |
 |
Using a screwdriver with its tip wrapped in protective tape, remove the piston seal from the disc brake cylinder.
- NOTICE:
- Do not damage the inner surface or piston seal groove of the cylinder.
| 3.
REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP |
|
| 4.
REMOVE FRONT DISC BRAKE BLEEDER PLUG |
|