REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 2.
DRAIN BRAKE FLUID |
 |
- NOTICE:
- Immediately wash off any brake fluid that comes into contact with any painted surfaces.
| 3.
SEPARATE FRONT FLEXIBLE HOSE |
 |
Remove the union bolt and gasket and separate the flexible hose from the disc brake cylinder.
| 4.
LOOSEN FRONT DISC BRAKE CYLINDER ASSEMBLY |
 |
Remove the 2 slide pin caps.
- Using "Torx" socket wrench T45, loosen the 2 slide pins.
| 5.
REMOVE FRONT DISC BRAKE CYLINDER MOUNTING |
 |
Remove the 2 bolts and remove the disc brake cylinder mounting from the steering knuckle.
| 6.
REMOVE FRONT DISC |
 |
Place matchmarks on the disc and axle hub and remove the disc.
| 7.
REMOVE FRONT DISC BRAKE ANTI-RATTLE SPRING |
 |
Remove the spring from the disc brake cylinder.
| 8.
REMOVE FRONT DISC BRAKE PAD |
 |
Remove the brake pad from the disc brake cylinder mounting.
| 9.
REMOVE FRONT DISC BRAKE CYLINDER ASSEMBLY |
 |
Using "Torx" socket wrench T45, remove the 2 slide pins and remove the disc brake cylinder.
| 10.
REMOVE FRONT DISC BRAKE BUSH DUST BOOT |
 |
Remove the 2 dust boots from the disc brake cylinder.